Great product . Value for money

The matt white effect is lovely (although it’s almost more of an eggshell than a true matt), but I do question the choice of a clear plastic backing (white would blend in better).My faceplate also came with a very small flaw in the paint. Not enough to warrant a return, but worth a mention.Also, a note on installation: do not over-tighten the screws, as it is possible to deform the mounting bracket, making it impossible to have the cover sit flat. If this happens, back out the screws a turn or two and try again.

Excellent Dimmer, which was easy to wire in to replace existing two way switch.It is solid, easy to adjust, and the push button switch is positive.Note uses a slight unconventional terminal allocation (the L1 and L2 terminal are equivalent to L2 and L3, and the In is equivalent to L1).This unit also requires slightly less depth within backplate than many of the alternatives, but won't fit inside a switch shallow box.Works with Dimmable LEDs only - non dimmable LEDs can't be used without flicker.So a great option if looking for a modern dimmer that will operate as 1/2 of a two way switch system.

Using it for toilet, cant be any happier with the purchase

Looks nice without having screws on the front. You will see the edge of the plastic/metal that is behind the plate when looking from the side.Only minus is the plastic box that houses dimmer electronics (in purple), which is the full length of the back plate. I used it in an old metal housing with 4 screw positions and had to remove two screw positions to get enough space.Also, do not tighten the nut too much that holds the dimmer switch to the plate as then the button will no longer pop back out.I am using it with "Amazon Basics Professional LED GU10 Spotlight Bulb, 35W equivalent, Warm White, Dimmable - Pack of 6" ‎929001870424. By setting the minimum dimmer setting lower I can dim the these 3.2W LED lights very low.