Carro de la compra

No hay artículos en el carro

No hay artículos en el carro
En stock

Airflow® Aventa 100T - Extractor en Línea con Temporizador Ajustable (2-30 min) | 21W Bajo Consumo | Caudal 40-52 l/s (144-187 m³/h) | IPX4 | Para Ductos 100mm | Garantía 3 Años

Envío gratis en pedidos superiores a 25,99€
56,29€ -50%

27,99€

1.Color:White


2.:100mm Básica


Acerca de este producto

  • Ventilador de flujo mixto de 100 mm, diseñado para instalaciones de conductos.
  • Bajo nivel de ruido de alta presión, dos velocidades, con temporizador.
  • Fácil acceso al impulsor para su mantenimiento.
  • Dos velocidades: 145/187 MHR; 40/52 l/s.


Flujo mixto, alto rendimiento Ventilador extractor en línea con 2 velocidades y temporizador. Diseño compacto que permite instalación en altillos. Capacidad para conductos de ventilación de hasta 6 m (3 a cada lado del ventilador). Utilizado principalmente en toda clase de cuartos de baño, duchas y baños anexos para controlar la humedad, condensación, olores y contaminantes aéreos El ventilador AVENTA AV100T también se puede utilizar para ventilar otros espacios como trasteros o cocinas. Incluye un soporte de montaje sencillo para facilitar su instalación en juntas y paneles Utilizar en conductos flexibles o rígidos de entrada y de salida El temporizador con retardo permite que los espacios se sigan ventilando una vez utilizados, garantizando la efectiva eliminación de los olores y la humedad El temporizador, situado sobre el ventilador, se puede ajustar entre 1 y 20 minutos. La velocidad se puede ajustar durante la instalación (1,2), o de manera alternativa, se puede utilizar un interruptor con 3 posiciones para poder controlar la velocidad de forma remota (apagado/baja/alta) El extractor se utiliza más comúnmente en ambas potencias en conexión con la luz del cuarto de baño. Ventilador de bajo Consumo (25 W) y silencioso (27 dB a 3 metros y 34 dB a máxima potencia), con un rendimiento de 145 m3/h (187 m3/h a máxima potencia). Apto para lugares de difícil acceso. Para doblar la presión y el flujo, instalar 2 ventiladores en serie. Motor con protección térmica


Baldy Dave
Reseñado en el Reino Unido el 4 de septiembre de 2023
Well made fan and easy to install as long as you have good basic knowledge of house electrics. The only gripe is that the instructions state that the fan will default to running for 15 minutes after the lights power off but mine timed-out after just under 2 mins. So either my fan was set up incorrectly at factory or the instructions are wrong.Thankfully (for me anyway) the instructions were written fairly well (could be better though) and the wiring and timer set procedure (simply turn a potentiometer) went smoothly.The fan is quiet for the amount of air it extracts, even set at fastest speed.All in all a good product and I hope I won’t have to claim during its 2 year warranty. One star removed for the miss-configured fan and slightly vague instructions, but apart from this I’d recommend.
Karl
Reseñado en el Reino Unido el 22 de febrero de 2021
Looks week built and fit for purpose, although plastic clamps and casing doesn’t seem very strong if miss handled. Easy to install, especially if just fitting to replace existing old extractor. If first fixing may need electrician, if your knowledge isn’t great.Not the quietest as it has good extraction power but also not too noisy, I.E you know it’s on but not too distracting or heard around the house. I guess it depends on where’s its fitted, mines in the loft and used dense foam to reduce vibrations you naturally get with fans.Very impressed with the ability to remove the fan from the housing for cleaning without needing to disconnect the ducting.Only been fitted a few weeks so can not talk of longevity of the product but so far no complaints at all.P.s. no idea what sheerness is to rate it? It’s not a town or swerving anything!?? ;p
John
Reseñado en el Reino Unido el 8 de septiembre de 2020
Great design - wiring box good and fan portion detaches from mounting bracket which retains ports at each end, so you can fit it to ducting and mount it without fan in the way. This is a great design (if you've ever tried to fit one without this!). Needs a 3-pole isolator for legal installation (for service access) because it has live, switched live (timer input from light circuit) and neutral. No earth connection needed. In operation fan is high flow (on full setting) and quite quiet. Timer defaults to 15mins which is perfect. Much better idea to put one of these in ducting above room than to have an in-wall tiny noisy low-flow fan.
francos fresse
Reseñado en Alemania el 14 de enero de 2017
der ventilator ist oredentlich verareitet, gut verpackt, ausreichend beschrieben, nur.... ein wenig zu schwach.also was meine bedürfnisse - absugen des duschdampfes - betrifft.
Mike Harrison
Reseñado en el Reino Unido el 8 de diciembre de 2013
I required a replacement fan for a bathroom ventilation installation in my attic. The old fan had burnt out after many years service, but rest of the installation was fine. The Airflow Aventa AV100T Timer Fan cost no more than a complete kit which I didn't need. This fan is a quality item in terms of design, build, ease of installation and operation. The fan module is held in a separate removable cradle, which makes mounting it very easy. Having screwed the mounting in place and attached the ducts, I wired the fan module in a convenient position, and then slotted the fan into the cradle and secured it with the 2 snap on retainers.In operation the fan is quiet and powerful, the 'run on' timer can be set for nominally 2 to 30 mins. (Make sure you adjust it to 2 mins for testing, mine arrived set to 30mins (which I didn't realise until the run-on ran on, and on, and on...) after 10 mins I switched off, reset to minimum run-on and tested again; 1 min 55secs. I initially wired mine for maximum speed, intending to adjust if it was too noisy, but from the bathroom directly below the fan in the attic, the fan is barely audible, whilst the airflow through the vent is excellent. Definitely recommended.

También te puede gustar